Silicon Image SiI3114 IDE Driver
BIOS, Drivers, and Firmware for legacy Silicon Image products are available in the Documentation Archive below. If you are SiI – PCI to 4 Port SATA Missing: IDE. I just installed an Addonics Multilane 4X SATA RAID PCI controller which uses a Silicon Image SiI chipset (PCI to 4 Port SATA). Download Silicon Image SiI SATARaid Controller [Mitac] PCI drivers at Silicon Image Serial ATA IDE Driver V and Raid Driver V for.
|Supported systems:||Windows 10, Windows 8.1, Windows 7|
|Price:||Free* [*Free Registration Required]|
Silicon Image SiI3114 IDE Driver
This allows maximum speed.
This provides data redundancy RAID 1and thus increased data security. Parity RAID dedicates the equivalent of one disk for storing parity stripes. The data and parity information is arranged on the disk array so that parity is written to different disks. The following example illustrates how the parity is rotated from disk to disk. Parity RAID uses less capacity for protection and is the preferred method to reduce the Silicon Image SiI3114 IDE per megabyte for larger installations.
RAID installation guide for Silicon Image SiI3114
The required capacity decreases as the number of disks in the group increases. JBOD function only supports one disk.
If you are planning to install Windows NT 4. A menu should automatically pop up if Autorun is enabled.
ASSP Software Archive - Lattice Semiconductor
However, it is still best to check. If not, follow the remaining steps to install the driver.
When installing hard disks for a RAID array, it is preferable to use disks that are similar. For best results, use identical disks.
Page 7 of 30 8 The main menu of the utility allows you to access Silicon Image SiI3114 IDE functions used to create and manage your RAID arrays. Please make you have already back up your data in hard drive before you create arrays 1 Enter the configuration utility and select Create RAID set. Disk copy - copy current content of source drive to mirror drive.
If online copy is selected, system will copy disk in background. If offline copy is selected, system will copy disk now. RAID 1 set formed must be repartitioned and reformatted to guarantee the consistency in their contents.
Page 9 of 30 10 3 Select Manual configuration. Page 10 of 30 11 4. Page 11 of 30 12 4.
Page 12 of 30 13 4. If after a disk failure the replacement disk was previously part of a RAID set or used in another system, it may have conflicting metadata, specifically in reference to the drive connection information. If so, this will prohibit the RAID set from being either created or rebuilt. In order for the RAID set to function properly, this old metadata must be first overwritten with the new metadata. To correct this, select "Resolve Conflict" and the correct metadata, including the correct drive connection information, will automatically be written to the replacement disk.
Be aware of this when performing a conflict resolution. To maintain the same drive lettering, the SATA cables connected to the drives may need to be swapped, or in the case of a SATA-based removable drive unit, the Silicon Image SiI3114 IDE of the Page 13 of 30 14 drives within the chassis made need to be changed. This is not an action which typically needs to be performed as formatting the drive under Windows is usually sufficient to prepare the Silicon Image SiI3114 IDE for use.
Page 14 of 30 15 4.
The Drivers Database - Free Drivers and Support
It is a display-only function. Use the up and down arrow keys to scroll between the drives in the Logical Drive Properties window.
Press the ESC key when done viewing logical drive information. You will have to partition and format the drive in order to properly use it.