Download Now
Buffalo LS220D NAS Driver

Buffalo LinkStation 2 Bay Nas File Server Personal Cloud. HERE IS HOW TO FIX BUFFALO LINKSTATION. I recently bought a Buffalo LinkStation LS NAS (network-attached storage) device. The device itself is a good quality piece of hardware, but. Recommended Drives List for NAS - Enclosure ModelsRecommended Drives List for NAS - Enclosure ModelsRecommended Drives List for NAS - Enclosure.


Buffalo LS220D NAS Update

Type: Driver
Rating:
3.75
244 (3.75)
Downloads: 998
File Size: 3.46Mb
Supported systems: Windows 7/8/10, Windows XP 64-bit, Mac OS X 10.X
Price: Free* [*Free Registration Required]

Download Now
Buffalo LS220D NAS Driver

Attach the hard drives to your computer. Open up a terminal and run GNU Parted on the block device representing the connected hard drive.

Buffalo LinkStation LSD Review & Rating

You can now unplug this hard drive and repeat the above process for the other drive. Once both drives are done, screw the mounting plates back on to the hard drives and install them back Buffalo LS220D NAS the NAS.

Plug in and Buffalo LS220D NAS on your NAS. After a few seconds, the LED on the front will flash red to let you know it failed to boot anything.

You will need to set Windows to a static IP of Right-click your network adapter and click Properties. After we have pulled out the drive trays its time to mount the hard drives.

Buffalo LinkStation LS420D

There are no rubber gaskets to help with vibrations but the plastic tray should absorb vibrations fairly well. Some attention to the tray slots is needed to orient the drives correctly but over all its fairly simple to do. Then simply snap the front cover back on and the Buffalo LS220D NAS is all set to go.

The physical setup took a matter of minutes and was very simple for even a novice user. The software will scan your network for Buffalo Buffalo LS220D NAS. When that is finished you will end up with two icons on your desktop, one for the management interface and the other for the LSD.

Buffalo LS220D NAS The next step is to setup a Administrator user name and password. The LSD starts out with the unit set to JBOD for drive configuration which is two separate drives, this is why we see two shared folders. All models come pre-populated with SATA drives.

Driver UPDATE: Buffalo LS220D NAS

It's on the small side, measuring 5 by 3. There's also a toggle switch for turning the NAS on and off. The front has two small LEDs which represent power and device status.

Buffalo LS220D NAS Drivers for Windows Download

On the front is a door that snaps off to reveal dual drive bays. SATA drives are mounted to plastic rails, making the drives easy to install and remove.

Related Drivers