Biostar A55MH AMD RAID Driver
LAN: 10Mb/Mb/1Gb Realtek RTLE LAN controller. RAID support: RAID 0/1/ SATA: 6 x SATA II 3Gb/s. USB: 2 x USB (header). Buy BIOSTAR A55MH FM1 AMD A55 (Hudson D2) HDMI Micro ATX AMD Motherboard with fast shipping and top-rated customer service. SATA RAID: 0/1/ RAID 0 / 1 / 10 support. OS Support. Windows XP / Vista / 7. Biostar reserves the right to add or remove support for any OS With or without notice. Windows XP.
|Supported systems:||Windows 10, Windows 8.1, Windows 8, Windows 7, Windows 2008, Windows Vista|
|Price:||Free* [*Free Registration Required]|
Biostar A55MH AMD RAID Driver
Biostar A55MH AMD A55 Hudson D2 FM1 2xDDR3 Matx Motherboard
Set the BIOS setting as follows: RAID 0 defines a disk striping scheme that improves Biostar A55MH AMD RAID read and write times for many applications. Every read and write is actually carried out in parallel across 2 disk drives in a RAID 1 array system.
The mirrored backup copy of the data can reside on the same disk or on a second redundant drive in the array. Resulting in a RAID 10 solution for improved resiliency, performance and rebuild performance. Features and Benefits Drives: Minimum 4, and maximum is 6 or 8, depending on the platform. You will see the following Biostar A55MH AMD RAID after you insert the CD The setup guide will auto detect your motherboard and operating system.
Biostar A55MH - motherboard - micro ATX - Socket FM1 - AMD A55
Before you start installing the motherboard, please make sure you follow the instructions below: Hold the board on the edge, do not try to bend or flex the board. Loose parts will cause short circuits which may damage the equipment. The package contents may be different due to area or your motherboard version. Pull the lever toward direction A from the socket and Biostar A55MH AMD RAID raise the lever up to a degree angle.
Look for the white triangle on socket, and the gold triangle on CPU should point towards this white triangle. The CPU will fit only in the correct orientation.
Hold the CPU down firmly, and then close the lever toward direct B to complete the installation. This completes the installation. The fan cable and connector may be different according to the fan manufacturer.
- BIOSTAR A55MH SETUP MANUAL Pdf Download.
- BioStar MotherBoard A55MH Ver 6.x
Connect the fan cable to the connector while matching the black wire to pin 1. When connecting with wires onto connectors, please note that the red wire is the positive and should be connected to Biostar A55MH AMD RAID 2, and the black wire is Ground and should be connected to GND.
Unlock a DIMM slot by pressing the retaining clips outward. If the DIMM does not go in smoothly, do not force it. Pull it all the way out and try again.
Dual Channel Memory installation Please refer to the following requirements to activate Dual Channel function: Single or double side memory moudule 9 Motherboard Manual 2. Pin opened Pin closed Pin closed 3.
Biostar A55MH AMD A55 Hudson D2 FM1 2xDDR3 Matx Motherboard eBay
Headers for USB 2. Header for USB 3.
Please carefully follow the procedures to avoid damaging the motherboard. Remove AC power line.
Wait for five seconds. Power on the AC.
Consumer IR Connector This header is for infrared remote control and communication. To make the two video devices work simultaneously and normally, please refer to the following setting.
Biostar A55MH Setup Manual
Single Channel or unbalanced memory does not support Dual Graphic function. NOTE The information described above in this manual is for your reference only and the actual information and settings on board may be different from this manual.
Set the BIOS setting as follows: