Asrock G41M-PS OC Tuner Driver
G41M-S3. LGA for Intel® Core™ 2 Extreme / Core™ 2 Quad / Core™ 2 Duo / Pentium® Dual. Core / Celeron® Dual Supports Smart BIOS, ASRock OC Tuner, Intelligent Energy Saver. EuP Ready 1 x PS/2 Keyboard Port. - 1 x Serial. CPU LGA for: Intel® Core™ 2 Extreme Core™ 2 Quad Core™ 2 Duo Pentium® Dual. ASRock MB Sc LGA, G41C-GS, G41, COMBO DDR / DDR, ports) Rear Panel I / OI / O Panel- 1 x PS / 2 Mouse Port- 1 x PS / 2 Keyboard Speaker / MicrophoneUnique Feature- ASRock OC Tuner- Intelligent Energy.
|Supported systems:||Windows Vista (32/64-bit), Windows XP (32/64-bit), Windows 8, Windows 10|
|Price:||Free* [*Free Registration Required]|
Asrock G41M-PS OC Tuner Driver
I am in need of your assistance as I am totally clueless even after searching the web for an answer but have had nothing definate.
Download Asrock G41M-VS3 R OC Tuner
Some Asrock G41M-PS OC Tuner sites said that some boards could use AM3 but I am sceptical about that myself. Any help would be gratefull as I am not very clued up PC wise. PC Spec's are as follow's incase that helps: The cpu you're planning on buying will run fine on that board.
AM3 CPU will not work on that board. I have bought from them when they were ewiz. Didnt have any problems at all. Never bought from them with their new name Superbiiz. Check the store rating here: To clear and reset the system parameters to default setup, please turn off the computer and unplug the power cord from the power supply.
The default setting short pin1 and pin2 is EuP enabled. If you want to disable this power saving function, you may short Asrock G41M-PS OC Tuner and pin3. Please short pin2, pin3 for FSB1 jumper.
Otherwise, the CPU and memory module may not work properly on this motherboard. Please refer to below jumper setting. Do NOT place jumper caps over these headers and connectors.
ASRock G41M-VS3 R Motherboard » in Myanmar
Placing jumper caps over the headers and connectors will cause permanent damage of the motherboard! Please refer to the instruction of your IDE device vendor for the details. Please follow the instruction in our manual and chassis manual to install your system. Enter Advanced Settings, and then select Chipset Configuration.
Please connect a CPU fan cable to this connector and match the black wire to the ground pin. Though this motherboard provides pin ATX power connector, it can still work if you adopt a traditional pin ATX power supply.
Failing to do so will cause the failure to power up. Then, the Asrock G41M-PS OC Tuner compatible to your system can be auto-detected and listed on the support CD driver page. Please follow the order from up to bottom side to install those required drivers. Therefore, the drivers you install Asrock G41M-PS OC Tuner work properly. Please refer to the warning on page 8 for the possible overclocking risk before you apply Untied Overclocking Technology.
You may also restart by turning the system off and then back on. Because the BIOS software is constantly being updated, the following BIOS setup screens and descriptions are for reference purpose only, and they may not exactly match what you see on your screen.
Second] Use this item to Asrock G41M-PS OC Tuner the system time. DRAM Frequency If [Auto] is selected, the motherboard will detect the memory module s inserted and assigns appropriate frequency automatically. The configuration options depend on the CPU and memory module you adopt on this motherboard.
The default value is [Auto]. Intel R SpeedStep tm tech. Processor can switch between multiple frequency and voltage points to enable power savings.
- ASRock G41M-VS3 with Pentium 4s with MHz FSB, Ram DDR3 Problem - Motherboards
- Mother G41M-S3 - Asrock - Unboxing by - Самые популярные видео
- Warranty & Support
- Key selling points
- ASRock G41M-PS User Manual
If you install Windows? VistaTM and want to enable this function, please set this Asrock G41M-PS OC Tuner to [Enabled]. Please note that enabling this function may reduce CPU voltage and lead to system stability or compatibility issue with some power supplies.
Please set this item to [Disable] if above issue occurs. Overclock Mode Use this to select Overclock Mode.