Download Now
ASIX AX88178A USB 2.0 to LAN Driver

2. AXA. USB to 10//M Gigabit Ethernet Controller ASIX provides this document “as is” without warranty of any kind, either expressed or. The AX has a 10// Ethernet MAC with GMII/RGMII interface for These devices will operate with both USB 1.x and USB controllers, however. The package provides the installation files for ASIX AXA USB to LAN Driver version If the driver is already installed on your.

ASIX AX88178A USB 2.0 to LAN Drivers Download Free

Type: Driver
50 (3.29)
Downloads: 385
File Size: 23.19Mb
Supported systems: Windows XP, Windows Vista, Windows 7, Windows 7 64 bit, Windows 8, Windows 8 64 bit, Windows 10, Windows 10 64 bit
Price: Free* [*Free Registration Required]

Download Now
ASIX AX88178A USB 2.0 to LAN Driver

The driver for the chipset Asix AX included with the Raspbian kernel v 3. With that driver the device is detected, but it does not seem to be possible to actually put any traffic through it.

USB 2.0 Gigabit Ethernet Adapter for Monoprice 9467 Chipset: ASIX AX88178

The version I used was "Linux kernel 3. The hardest part was in fact getting the Linux source code required, because the repositores contained the source for the wrong kernel version.

Driver for ASIX AX88178A USB 2.0 to LAN

Reboot and you should have a fully working Ethernet adapter. No external power source or USB hub needed.

Works out of the box on Raspbian. Works without a powered hub or when plugged into an unpowered hub on a Model "A" Pi.

ASIX AX88178A USB 2.0 to LAN Drivers PC

Adapter needs last raspbian kernel. With older kernels adapter working about 10 minutes without problem, but after that kernel write error message to dmesg and no packet is received. You do not need be root to do this.

ASIX AX88178A USB 2.0 to LAN Descargar Controlador

Continue only if step 5 did NOT generate an error, if you get an error, you will have to resolve that first. On my end I got no errors at all. Check whether you already have the default asix module loaded, if so you must first unload it to ASIX AX88178A USB 2.0 to LAN risk crashing your system. To do so, run lsmod lsmod This command lists all the currently loaded modules.

If you want, pipe that through grep: Then you ASIX AX88178A USB 2.0 to LAN to remove it with rmmod as in: To copy the existing file, do this: Copy the new module in the kernel module area The new file, asix. Choose to select the location of the new driver manually and browse to the folder where you extracted the driver 5.

If you already have the driver installed and want to update to a newer version got to "Let me pick from a list of device drivers on my computer" 6.

ASIX AX88178A USB 2.0 to LAN Driver for Windows 10 64-bit

Click "Have Disk" 7. Browse to the folder where you extracted the driver and click Ok About Ethernet Driver: Cable Matters USB 3.

Easy to follow instructions on how to download the kernel source code and symbol files can be found in the 2nd posting hereincluding how to compile the module. AX chipset using the asix kernel driver. Does not work without powered USB hub.

Bus Device This only supports USB1. If you get a model without the Logilink logo and the model number JP it's a fake.

Drivers for manufacturers ASIX

Works out of the box driver present since kernel 2. USB register states that it draws max. Works out of the box without any setup.

Related Drivers